Front page
ASME VIII Div.1 Head Thickness Calculation on Concave Side
For information about Formed Heads. Pressure on Concave Side Click Here
Internal Design Pressure (psi):
Material:
Select Material
SA-516 Gr. 70
SA-515 Gr. 70
SA-283 Gr. C
SA-240 316L
SA-240 304L
Others
Head Type:
Select Head Type
Eellipsoidal
Torispherical
Hemispherical
Conical
Toriconical
Minimum Specified Thickness of Head After Forming (in):
Corrosion allowance, in :
0.0
0.03125
0.0625
0.125
0.1875
0.25
Inside Diameter (in):
Crown Radius (in):
Knuckle Radius (in):
1/2 of Cone Angle, α (degrees):
Inside Depth of the Ellipsoidal Head Measured From the Tangent Line, h:
Design Temperature (°F):
Allowable Stress at Design Tempereture (psi):
Modulus of Elasticity at Design Temperature, KSI* 10^6
Lowest Efficiency in the Head:
Calculate